TECHNICAL SPECIFICATIONS

SolarRO BW 30

Brackish Water Reverse Osmosis System

1,3 m³/h

59 %

2,4 kWh

1,7 kWh/m³

Make Clean Water with Solar. Cut Costs. Build Resilience.

Technical Specifications

Product water flow rate*	1,3 m³/h
Product water quality*	TDS < 40 mg/L, pH 6.9
Raw water feed flow rate	2,2 m³/h
Recovery rate*	59 %
Minimum salt rejection	99,5 %
Brine flow rate*	0,9 m3/h (185 gal/h)
Brine quality*	TDS 5100 mg/L
System pressure	13 bar
High-pressure pump	AISI 316L centrifugal multi-stage
HPP motor	2,2 kW, Bevi
Raw water feed pump**	0,37 kW, AISI 316L
Pressure vessels	6 x 4040, Composite
RO Membranes	6 x 4040 BW30HRLE or equivalent
Cartridge pre-filtration	PP 20”, 100, 25, 3 micron
Variable frequency drive (VFD)	Vacon 100X, 3,0 kW, Danfoss
Specific energy***	1,6 kWh/m3
Recommended minimum solar PV power***	5,1 kWp
DC power supply requirement (solar PV)	600 – 800 VDC
AC power supply requirement (grid)	380 – 480 VAC / 50 – 60 Hz
Daily capacity with direct solar power	10,4 m³ in 8 solar hours/day

* Test Conditions: Raw water TDS 2000 mg/l, pH 8, T 25°C, system pressure 13 bar. Raw water pump model and characteristics subject to change depending on site-specific requirements. * Energy consumption kWh per m3 of produced clean water, including a raw water feed pump. **** Based on a direct solar-powered or solar + grid-powered system. True water cost varies based on energy sources, electricity price, raw water quality and prefiltration etc. Specifications and system design are subject to change without prior notice.

Operating Conditions

Raw water source	Lake / river / brackish borehole
Raw water TDS range	500 – 6000 mg/L
Raw water temperature range	5 – 45 °C
Air temperature range	0 – 45 °C
Raw water feed pressure range	1 – 5 bar
* If these values for feed water are exceeded, appropriate substance removal prefiltration must be installed before the unit